PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1050707
1050707 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 24.094 INCHES NOMINAL IN, first_leg_length: 0.750 INCHES NOMINAL IN, second_leg_style: SQUARE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-141-6069, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1050707
NSN: 5340-00-141-6069
FSC: 5340
CAGE: 22888 — FMC CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width24.094 INCHES NOMINAL IN
first_leg_length0.750 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width24.094 INCHES NOMINAL IN
special_featuresFOUR HOLES IN FIRST LEG
style_designatorANGLE
second_leg_length0.750 INCHES NOMINAL IN
first_leg_thickness0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
second_leg_thickness0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
NSN5340-00-141-6069
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1050707 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 1.000 INCHES NOMINAL IN
•
FIRST LEG THICKNESS: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH: 7.343 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG LENGTH: 0.750 INCHES NOMINAL IN
•
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH: 7.375 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH1.000 INCHES NOMINAL IN
FIRST LEG THICKNESS0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH7.343 INCHES NOMINAL IN
SPECIAL FEATURESFOUR HOLES IN FIRST LEG
STYLE DESIGNATORANGLE
FIRST LEG LENGTH0.750 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH7.375 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG WIDTH24.094 INCHES NOMINAL IN
SECOND LEG THICKNESS0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
01528Interchangeable
interchangeable cross-reference
interchangeable
01174 PIECE A6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1050707?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1050707?
1050707 is a BRACKET,ANGLE.
What parts can replace 1050707?
There are 2 known substitutes for 1050707: 01528, 01174 PIECE A6. Substitute compatibility should be verified for your specific system.
What is the NSN for 1050707?
1050707 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-141-6069. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1050707

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026