10501937 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

10501937: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL PROPERTY CLASS 8.8 OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 10.0 MILLIMETERS NOMINAL MM, thread_length: 10.4 MILLIMETERS MINIMUM AND 12.0 MILLIMETERS MAXIMUM MM, fastener_length: 12.00 MILLIMETERS NOMINAL MM, hardness_rating: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-155-7488, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

10501937

NSN: 5305-01-155-7488
FSC: 5305 — Screws
CAGE: 56161 — GENERAL DYNAMICS LAND SYSTEMS CANADACORP (CAN)

SPECIFICATIONS

material	STEEL PROPERTY CLASS 8.8 OVERALL
head_style	FLAT COUNTERSUNK
head_diameter	10.0 MILLIMETERS NOMINAL MM
thread_length	10.4 MILLIMETERS MINIMUM AND 12.0 MILLIMETERS MAXIMUM MM
fastener_length	12.00 MILLIMETERS NOMINAL MM
hardness_rating	18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
thread_direction	RIGHT-HAND
countersink_angle	90.0 DEGREES NOMINAL
surface_treatment	ZINC OVERALL
width_across_flats	3.0 MILLIMETERS NOMINAL MM
internal_drive_style	HEXAGON
nominal_thread_diameter	5.0 MILLIMETERS MM
NSN	5305-01-155-7488

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 3.0 MILLIMETERS NOMINAL MM

•

FASTENER LENGTH: 12.00 MILLIMETERS NOMINAL MM

•

THREAD PITCH IN MILLIMETERS: 8.0

•

THREAD LENGTH: 10.4 MILLIMETERS MINIMUM AND 12.0 MILLIMETERS MAXIMUM MM

•

HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL

•

NOMINAL THREAD DIAMETER: 5.0 MILLIMETERS MM

•

HEAD STYLE: FLAT COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	3.0 MILLIMETERS NOMINAL MM
FASTENER LENGTH	12.00 MILLIMETERS NOMINAL MM
THREAD PITCH IN MILLIMETERS	8.0
THREAD LENGTH	10.4 MILLIMETERS MINIMUM AND 12.0 MILLIMETERS MAXIMUM MM
HARDNESS RATING	18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER	5.0 MILLIMETERS MM
HEAD STYLE	FLAT COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
SURFACE TREATMENT	ZINC OVERALL
MINIMUM TENSILE STRENGTH	113784 POUNDS PER SQUARE INCH LBS

SUBSTITUTES & CROSS-REFERENCES 4

DIN7991-M5-12-10.9-A2LReference document

Same NSN cross-reference

Reference document — Secondary reference

ISO10642Reference document

Same NSN cross-reference

Reference document — Secondary reference

ISO10642-8,8-A2L M5X12Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

DIN7991-8,8-A2L M5X12Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 10501937?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 10501937?

10501937 is a SCREW,CAP,SOCKET HEAD.

What parts can replace 10501937?

There are 4 known substitutes for 10501937: DIN7991-M5-12-10.9-A2L, ISO10642, ISO10642-8,8-A2L M5X12 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 10501937?

10501937 is cataloged in the U.S. Government catalog under NSN 5305-01-155-7488. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

10501937 — SCREW,CAP,SOCKET HEAD

Request a Quote — 10501937