PartsTable
Technical Data Sheet
PartsTable / MRO / 105-607
105-607 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The DIFFERENTIAL SUBASS is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY SPRING, nut_style: SQUARE, body_style: THREADED BUSHING MOUNTED, nut_height: 0.356 INCHES MINIMUM AND 0.394 INCHES MAXIMUM IN, body_length: 0.750 INCHES NOMINAL IN, thread_class: 2A A. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-010-5607, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 105-607
NSN: 5310-00-010-5607
FSC: 5310
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialCOPPER ALLOY SPRING
nut_styleSQUARE
body_styleTHREADED BUSHING MOUNTED
nut_height0.356 INCHES MINIMUM AND 0.394 INCHES MAXIMUM IN
body_length0.750 INCHES NOMINAL IN
thread_class2A A
terminal_typeTURRET
thread_seriesUNIFIED NATIONAL COARSE (UNC)
overall_length7.000 INCHES IN
overall_diameter0.375 INCHES NOMINAL IN
special_featuresMIL-C-17/113-RG316
style_designatorEXTERNAL ANGLE CONNECTOR
NSN5310-00-010-5607
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 105-607 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
BEARING SURFACE TYPE: FLAT
•
THREAD QUANTITY PER INCH: 14
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
•
MATERIAL: STEEL OVERALL
•
WIDTH ACROSS FLATS: 0.728 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 STYLE AND A GRADE
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
BEARING SURFACE TYPEFLAT
THREAD QUANTITY PER INCH14
NOMINAL THREAD SIZE0.438 INCHES IN
MATERIALSTEEL OVERALL
WIDTH ACROSS FLATS0.728 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 STYLE AND A GRADE
THREAD CLASS2B
NUT STYLESQUARE
NUT HEIGHT0.356 INCHES MINIMUM AND 0.394 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
105604Interchangeable
interchangeable cross-reference
interchangeable
D4203BInterchangeable
interchangeable cross-reference
interchangeable
105-607Interchangeable
interchangeable cross-reference
interchangeable
1505-107Interchangeable
interchangeable cross-reference
interchangeable
57A5A25-7Interchangeable
interchangeable cross-reference
interchangeable
62150Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 105-607?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 105-607?
105-607 is a DIFFERENTIAL SUBASS. It is classified as a MRO (MRO_GENERAL).
What parts can replace 105-607?
There are 8 known substitutes for 105-607: 105604, D4203B, 105-607 and 5 more. Substitute compatibility should be verified for your specific system.
Is 105-607 still available?
105-607 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 105-607

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026