PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 105-10/72
105-10/72 ✓ Verified by PartsTable
— · GATE VALVE
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

The 105-10/72 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-01-013-9969, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
105-10/72
NSN: 4820-01-013-9969
FSC: 4820
CAGE: 79067 — APCO/VALVE & PRIMER CORP (USA)
SPECIFICATIONS
Part Number105-10/72
NSN4820-01-013-9969
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 105-10/72 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PRESSURE RATING: 320.0 POUNDS PER SQUARE INCH (PSI) MINIMUM AND 325.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
•
UNDER FLANGE HEIGHT: 0.281 INCHES NOMINAL IN
•
INSIDE DIAMETER: 5.750 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC AND STEEL
•
FLANGE SEAT TO DISK END HEIGHT: 1.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SWING CHECK
•
OUTSIDE DIAMETER: 7.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PRESSURE RATING320.0 POUNDS PER SQUARE INCH (PSI) MINIMUM AND 325.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
UNDER FLANGE HEIGHT0.281 INCHES NOMINAL IN
INSIDE DIAMETER5.750 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC AND STEEL
FLANGE SEAT TO DISK END HEIGHT1.250 INCHES NOMINAL IN
STYLE DESIGNATORSWING CHECK
OUTSIDE DIAMETER7.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
10510Interchangeable
interchangeable cross-reference
interchangeable
5001/2078Interchangeable
interchangeable cross-reference
interchangeable
10J10Interchangeable
interchangeable cross-reference
interchangeable
13J45MInterchangeable
interchangeable cross-reference
interchangeable
211013Interchangeable
interchangeable cross-reference
interchangeable
7606Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 105-10/72?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 105-10/72?
105-10/72 is a 105-10/72.
What parts can replace 105-10/72?
There are 20 known substitutes for 105-10/72: 10510, 5001/2078, 10J10 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 105-10/72?
105-10/72 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-01-013-9969. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 105-10/72

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026