PartsTable
Technical Data Sheet
Download PDF

104J005-30 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

104J005-30: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1060 OR STEEL COMP 1070 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL, hole_diameter: 0.636 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 1.079 INCHES MAXIMUM IN, special_features: CERTIFIED FREE FROM MERCURY CONTAMINATION, style_designator: SPLIT HELICAL-RIGHT HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-004-5034, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
104J005-30
NSN: 5310-00-004-5034
FSC: 5310 — Nuts and Washers
CAGE: 62793 — BFM ENERGY PRODUCTS CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1060 OR STEEL COMP 1070 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
hole_diameter0.636 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter1.079 INCHES MAXIMUM IN
special_featuresCERTIFIED FREE FROM MERCURY CONTAMINATION
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentCADMIUM OVERALL
material_thickness0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
special_test_featuresSPECIAL QUALITY CONTROL TESTING
nondefinitive_spec/std_data2 STYLE AND A CLASS
departure_from_cited_documentMATERIAL MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
NSN5310-00-004-5034
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 104J005-30 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 1.079 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
•
DEPARTURE FROM CITED DOCUMENT: MATERIAL MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER1.079 INCHES MAXIMUM IN
MATERIAL THICKNESS0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
DEPARTURE FROM CITED DOCUMENTMATERIAL MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
NONDEFINITIVE SPEC/STD DATA2 STYLE AND A CLASS
SPECIAL FEATURESCERTIFIED FREE FROM MERCURY CONTAMINATION
SUBSTITUTES & CROSS-REFERENCES 4
5310000045034Reference document
Same NSN cross-reference
Reference document — Informative reference only
FFW84Reference document
Same NSN cross-reference
Reference document — Identification reference
MS35338-50Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310PL0776522Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 104J005-30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 104J005-30?
104J005-30 is a WASHER,LOCK.
What parts can replace 104J005-30?
There are 4 known substitutes for 104J005-30: 5310000045034, FFW84, MS35338-50 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 104J005-30?
104J005-30 is cataloged in the U.S. Government catalog under NSN 5310-00-004-5034. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 104J005-30

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.