PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 104969R91
104969R91 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 INNER RING, bore_shape: STRAIGHT, bore_diameter: 17.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 0.6536 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3510, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
104969R91
NSN: 3110-00-156-3510
FSC: 3110
CAGE: 31007 — NAVISTAR INTERNATIONAL CORPORATION DBA NAVISTAR (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 INNER RING
bore_shapeSTRAIGHT
bore_diameter17.0 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.6536 INCHES NOMINAL IN
outer_ring_width0.5630 INCHES NOMINAL IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter40.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
NSN3110-00-156-3510
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 104969R91 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL QUANTITY: 2
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
SEAL QUANTITY2
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
BORE SHAPESTRAIGHT
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
SURFACE FINISHGROUND
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONSTANDARD
SEAL QUANTITY2
LUBRICATION MATERIALGREASE
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
481556-1Interchangeable
interchangeable cross-reference
interchangeable
43-66-2Interchangeable
interchangeable cross-reference
interchangeable
270-001-212Interchangeable
interchangeable cross-reference
interchangeable
SAE-J512Interchangeable
interchangeable cross-reference
interchangeable
SAE J512 6-4 040202BInterchangeable
interchangeable cross-reference
interchangeable
J512Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 104969R91?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 104969R91?
104969R91 is a BEARING,BALL,ANNULAR.
What parts can replace 104969R91?
There are 18 known substitutes for 104969R91: 481556-1, 43-66-2, 270-001-212 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 104969R91?
104969R91 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3510. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 104969R91

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026