PartsTable
Technical Data Sheet
Download PDF

104753 — CABLE ASSEMBLY,POWER,ELECTRICAL

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

104753: CABLE ASSEMBLY,POWER,ELECTRICAL.

CABLE ASSEMBLY,POWER,ELECTRICAL. Key specifications include material: STEEL CORROSION RESISTING FLOW CONTROL DEVICE, duty_type: CONTINUOUS, mesh_size: 20.000, construction: ONE-PIECE, nominal_width: 1.125 INCHES ALL ENDS IN, overall_width: 1.860 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-279-9023, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 104753
NSN: 5330-00-279-9023
NIINs: 002799023, 003777386, 004727191, 012448818, 014077604, 014667171
FSC: 5330 — Packing and Gasket Materials
CAGE: 068H2 — UNISON INDUSTRIES INC. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING FLOW CONTROL DEVICE
duty_typeCONTINUOUS
mesh_size20.000
constructionONE-PIECE
coil_quantity1
nominal_width1.125 INCHES ALL ENDS IN
overall_width1.860 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
nominal_length2.125 INCHES ALL ENDS IN
overall_height0.672 INCHES NOMINAL IN
overall_length1.969 INCHES NOMINAL IN
outside_diameter0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
NSN5330-00-279-9023
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 104753 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RETAINER
•
PACKING INSIDE DIAMETER: 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248,TY 1,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE PACKING
•
SPECIFICATION/STANDARD DATA: 80205-NAS 1523 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
RETAINER THICKNESS: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RETAINER
PACKING INSIDE DIAMETER0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
PACKING RING CROSS-SECTIONAL DIAMETER0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248,TY 1,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE PACKING
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059,COND 1/2 H OR ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE RETAINER
SPECIFICATION/STANDARD DATA80205-NAS 1523 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
RETAINER THICKNESS0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE RETAINER
MATERIALSTEEL COMP 301 OR STEEL COMP 302 RETAINER
SUBSTITUTES & CROSS-REFERENCES 6
600-3030-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
NASS1523C3EReference document
Same NSN cross-reference
Reference document — Secondary reference
10119458Reference document
Same NSN cross-reference
Reference document — Informative reference only
583-523-9001Reference document
Same NSN cross-reference
Reference document — Secondary reference
NAS1523C3EReference document
Same NSN cross-reference
Reference document — Secondary reference
600-3130-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 104753?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 104753?
104753 is a CABLE ASSEMBLY,POWER,ELECTRICAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 104753?
There are 6 known substitutes for 104753: 600-3030-10, NASS1523C3E, 10119458 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 104753?
104753 is cataloged in the U.S. Government catalog under NSN 5330-00-279-9023. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 104753

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.