PartsTable
Technical Data Sheet
Download PDF

10474LPDH1L5 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10474LPDH1L5: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, seal_width: 0.375 INCHES NOMINAL IN, construction: SOLID, housing_bore_diameter: 3.062 INCHES NOMINAL IN, accommodated_shaft_diameter: 2.062 INCHES NOMINAL IN, cross-sectional_shape_style: SINGLE LIP. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-849-7037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10474LPDH1L5
NSN: 5330-00-849-7037
FSC: 5330 — Packing and Gasket Materials
CAGE: 48482 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV ENGINEERED POLYMER SYSTEMS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
seal_width0.375 INCHES NOMINAL IN
constructionSOLID
housing_bore_diameter3.062 INCHES NOMINAL IN
accommodated_shaft_diameter2.062 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-849-7037
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10474LPDH1L5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 2.062 INCHES NOMINAL IN
•
MATERIAL: STEEL SPRING
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.375 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER2.062 INCHES NOMINAL IN
MATERIALSTEEL SPRING
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES 4
10-1304-09Reference document
Same NSN cross-reference
Reference document — Secondary reference
08-2228-04Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LPD10474Reference document
Same NSN cross-reference
Reference document — Secondary reference
54525PC41Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10474LPDH1L5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10474LPDH1L5?
10474LPDH1L5 is a SEAL,PLAIN.
What parts can replace 10474LPDH1L5?
There are 4 known substitutes for 10474LPDH1L5: 10-1304-09, 08-2228-04, LPD10474 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10474LPDH1L5?
10474LPDH1L5 is cataloged in the U.S. Government catalog under NSN 5330-00-849-7037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10474LPDH1L5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.