PartsTable
Technical Data Sheet
Download PDF

104629 — CONVERTER,RECORD

✓ Government record, cited
Hama · MRO · MRO_GENERAL
PRODUCT OVERVIEW

104629: CONVERTER,RECORD.

- Sleeve which protects the Apple iPad against dirt and scratches - Soft inside lining that protects the sensitive display. Key specifications include head_style: PAN, head_height: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, thread_length: 0.138 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN, screw_material: COPPER ALLOY. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-206-1270, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 104629
NSN: 5305-00-206-1270
NIINs: 002061270, 011586878, 012399605
FSC: 5305 — Screws
CAGE: 31550 — L3HARRIS TECHNOLOGIES, INC. DBA HARRIS CORPORATION (USA)
SPECIFICATIONS
head_stylePAN
head_height0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
thread_length0.138 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
special_featuresPWB 1; RESISTOR 3; MICROPROCESSOR 69; CONNECTOR 9; CAP 39; SWITCH 1; DIODE 2
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
minimum_tensile_strength57000 POUNDS PER SQUARE INCH LBS
NSN5305-00-206-1270
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 104629 · Hama ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.138 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: PAN
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: COPPER ALLOY
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
FASTENER LENGTH0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.138 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEPAN
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALCOPPER ALLOY
MINIMUM TENSILE STRENGTH57000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SUBSTITUTES & CROSS-REFERENCES 8
15221 BLK.OXIDEADXReference document
Same NSN cross-reference
Reference document — Secondary reference
119850-002Reference document
Same NSN cross-reference
Reference document — Secondary reference
81778Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS35214-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
P343-0284-000Reference document
Same NSN cross-reference
Reference document — Secondary reference
15221 BLK.OXIDEReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 104629?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 104629?
104629 is a CONVERTER,RECORD manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 104629?
There are 8 known substitutes for 104629: 15221 BLK.OXIDEADX, 119850-002, 81778 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 104629?
104629 is cataloged in the U.S. Government catalog under NSN 5305-00-206-1270. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 104629

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.