PartsTable
Technical Data Sheet
Download PDF

1045Z1366 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1045Z1366: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 5.152 INCHES MINIMUM AND 5.234 INCHES MAXIMUM IN, center_hole_diameter: 4.972 INCHES MINIMUM AND 5.002 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-438-8685, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1045Z1366
NSN: 5331-00-438-8685
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter5.152 INCHES MINIMUM AND 5.234 INCHES MAXIMUM IN
center_hole_diameter4.972 INCHES MINIMUM AND 5.002 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-438-8685
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1045Z1366 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 5.152 INCHES MINIMUM AND 5.234 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
CENTER HOLE DIAMETER: 4.972 INCHES MINIMUM AND 5.002 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
TECHNICAL CHARACTERISTICS
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER5.152 INCHES MINIMUM AND 5.234 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE331 MAXIMUM
CENTER HOLE DIAMETER4.972 INCHES MINIMUM AND 5.002 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
SUBSTITUTES & CROSS-REFERENCES 7
2-159N0674-70Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-159/N674-70Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
45Z91D144Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
AS468-159/ASTM D2000-M3CH714Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-159N219-7Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
N72159Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 1045Z1366?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1045Z1366?
1045Z1366 is a O-RING.
What parts can replace 1045Z1366?
There are 7 known substitutes for 1045Z1366: 2-159N0674-70, 2-159/N674-70, 45Z91D144 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1045Z1366?
1045Z1366 is cataloged in the U.S. Government catalog under NSN 5331-00-438-8685. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1045Z1366

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.