PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 104560
104560 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, head_style: KNURLED NO. 1, head_height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, overall_width: 0.8125 INCHES NOMINAL IN.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0598, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
104560
NSN: 3110-00-100-0598
FSC: 3110
CAGE: 29510 — KOMATSU AMERICAN INTL CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleKNURLED NO. 1
head_height0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
overall_width0.8125 INCHES NOMINAL IN
fastener_length1.500 INCHES NOMINAL IN
outside_diameter3.7500 INCHES MINIMUM AND 3.7510 INCHES MAXIMUM IN
style_designatorNORMAL ANGLE
thread_directionRIGHT-HAND
width_across_flats0.158 INCHES NOMINAL IN
internal_drive_styleHEXAGON
NSN3110-00-100-0598
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 104560 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.0310 INCHES MINIMUM AND 0.0470 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OUTSIDE DIAMETER: 3.7500 INCHES MINIMUM AND 3.7510 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BACKFACE CORNER RADIUS0.0310 INCHES MINIMUM AND 0.0470 INCHES MAXIMUM IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
OVERALL WIDTH0.8125 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OUTSIDE DIAMETER3.7500 INCHES MINIMUM AND 3.7510 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
5337-5Interchangeable
interchangeable cross-reference
interchangeable
N233Interchangeable
interchangeable cross-reference
interchangeable
15-233Interchangeable
interchangeable cross-reference
interchangeable
51800000Interchangeable
interchangeable cross-reference
interchangeable
1034-2Interchangeable
interchangeable cross-reference
interchangeable
40253Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 104560?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 104560?
104560 is a CUP,TAPERED ROLLER BEARING.
What parts can replace 104560?
There are 25 known substitutes for 104560: 5337-5, N233, 15-233 and 22 more. Substitute compatibility should be verified for your specific system.
Is 104560 still available?
104560 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 104560

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026