PartsTable
Technical Data Sheet
Download PDF

104519 — CAPACITOR,FIXED,CERAMIC DIELECTR

✓ Government record, cited
Disguise · MRO · MRO_GENERAL
PRODUCT OVERVIEW

104519: CAPACITOR,FIXED,CERAMIC DIELECTR.

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: STEEL OVERALL, bore_diameter: 0.5000 INCHES NOMINAL IN, overall_width: 0.5000 INCHES NOMINAL IN, alignment_type: RIGID, overall_length: 0.9300 INCHES MINIMUM AND 0.9500 INCHES MAXIMUM IN, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-7721, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 104519
NSN: 3110-00-156-7721
NIINs: 001567721, 007767022, 009723067, 012565277
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 81580 — MCCULLOCH CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.5000 INCHES NOMINAL IN
overall_width0.5000 INCHES NOMINAL IN
alignment_typeRIGID
overall_length0.9300 INCHES MINIMUM AND 0.9500 INCHES MAXIMUM IN
surface_finishGROUND
special_featuresOIL HOLE IN OUTER RACE,EXTRA-CAPACITY OUTER RACE
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
body_inside_diameter0.6400 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM IN
body_outside_diameter0.8730 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
end_item_identificationLOGISTICS SUPPORT VESSEL (LSV)
overall_outside_diameter0.6875 INCHES NOMINAL IN
NSN3110-00-156-7721
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 104519 · Disguise ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
OVERALL OUTSIDE DIAMETER: 0.6875 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
OVERALL WIDTH0.5000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.6875 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL HOLE IN OUTER RACE,EXTRA-CAPACITY OUTER RACE
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL (LSV)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.5000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 9
1F4622Reference document
Same NSN cross-reference
Reference document — Secondary reference
354080Reference document
Same NSN cross-reference
Reference document — Secondary reference
942532Reference document
Same NSN cross-reference
Reference document — Secondary reference
4E5527Reference document
Same NSN cross-reference
Reference document — Secondary reference
51595AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS17131-13Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 104519?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 104519?
104519 is a CAPACITOR,FIXED,CERAMIC DIELECTR manufactured by Disguise. It is classified as a MRO (MRO_GENERAL).
What parts can replace 104519?
There are 9 known substitutes for 104519: 1F4622, 354080, 942532 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 104519?
104519 is cataloged in the U.S. Government catalog under NSN 3110-00-156-7721. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 104519

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.