PartsTable
Technical Data Sheet
Download PDF

10450715 — NUT,SELF-LOCKING,SLOTTED,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10450715: NUT,SELF-LOCKING,SLOTTED,HEXAGON.

NUT,SELF-LOCKING,SLOTTED,HEXAGON. Key specifications include part_name_assigned_by_controlling_agency: TRAVELCASE. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-505-2721, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10450715
NSN: 5310-00-505-2721
NIINs: 005052721, 017055706
FSC: 5310 — Nuts and Washers
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyTRAVELCASE
NSN5310-00-505-2721
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10450715 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN OR PREVAILING TORQUE WITH NONMETALLIC INSERT
•
NUT HEIGHT: 0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN OR PREVAILING TORQUE WITH NONMETALLIC INSERT
NUT HEIGHT0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CARBON OVERALL EXCEPT INSERT
NUT STYLESLOTTED, HEXAGON
SUBSTITUTES & CROSS-REFERENCES 5
F12NE4753-126Reference document
Same NSN cross-reference
Reference document — Secondary reference
F12NEC-1216Reference document
Same NSN cross-reference
Reference document — Secondary reference
938.08.71.212Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS17825-12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7F12NEC1216Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10450715?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10450715?
10450715 is a NUT,SELF-LOCKING,SLOTTED,HEXAGON.
What parts can replace 10450715?
There are 5 known substitutes for 10450715: F12NE4753-126, F12NEC-1216, 938.08.71.212 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10450715?
10450715 is cataloged in the U.S. Government catalog under NSN 5310-00-505-2721. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10450715