PartsTable
Technical Data Sheet
Download PDF

1045-125-SS-20 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1045-125-SS-20: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: CLINCH, nut_height: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, nut_diameter: 0.371 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN, pilot_length: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-183-7940, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1045-125-SS-20
NSN: 5310-01-183-7940
FSC: 5310 — Nuts and Washers
CAGE: 55566 — MATTHEW WARREN, INC DBA RAF ELECTRONIC HARDWARE DIV RAF ELECTRONIC HARDWARE, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleCLINCH
nut_height0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
nut_diameter0.371 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
pilot_length0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
pilot_diameter0.267 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.190 INCHES IN
thread_quantity_per_inch32
NSN5310-01-183-7940
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1045-125-SS-20 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT DIAMETER: 0.371 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
•
PILOT DIAMETER: 0.267 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
NUT HEIGHT: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT DIAMETER0.371 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
PILOT DIAMETER0.267 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
PILOT LENGTH0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
NUT HEIGHT0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLECLINCH
THREAD CLASS2B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1045-125-SS-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1045-125-SS-20?
1045-125-SS-20 is a NUT,PLAIN,CLINCH.
What is the NSN for 1045-125-SS-20?
1045-125-SS-20 is cataloged in the U.S. Government catalog under NSN 5310-01-183-7940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1045-125-SS-20

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.