The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8740 STEM, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING MECHANICALLY LOCKED STEM, shank_diameter: 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN, fastener_length: 0.627 INCHES MINIMUM AND 0.647 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5320-01-086-1146, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP 8740 STEM |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| grip_length | 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN |
| shank_style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| shank_diameter | 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN |
| fastener_length | 0.627 INCHES MINIMUM AND 0.647 INCHES MAXIMUM IN |
| expansion_device | SERRATED STEM-TYPE W |
| countersink_angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| surface_treatment | CADMIUM AND CHROMATE STEM |
| head_major_diameter | 0.357 INCHES MAXIMUM IN |
| material_document_and_classification | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| surface_treatment_document_and_classification | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| NSN | 5320-01-086-1146 |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATERIAL | STEEL COMP 8740 STEM |
| SURFACE TREATMENT | CHROMATE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| SHANK DIAMETER | 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN |
| FASTENER LENGTH | 0.627 INCHES MINIMUM AND 0.647 INCHES MAXIMUM IN |
| SPECIAL FEATURES | "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY. |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| MATERIAL | ALUMINUM ALLOY 5056 SLEEVE |