PartsTable
Technical Data Sheet
Download PDF

104239 — 104239

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

104239: 104239.

The 104239 is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, fork_depth: 0.750 INCHES NOMINAL IN, shank_length: 3.130 INCHES NOMINAL IN, overall_width: 0.375 INCHES NOMINAL IN, overall_height: 0.375 INCHES NOMINAL IN, overall_length: 8.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-358-9593, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 104239
NSN: 5330-00-358-9593
NIINs: 003589593, 010036565, 011362885, 011493190
FSC: 5330 — Packing and Gasket Materials
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
fork_depth0.750 INCHES NOMINAL IN
shank_length3.130 INCHES NOMINAL IN
overall_width0.375 INCHES NOMINAL IN
overall_height0.375 INCHES NOMINAL IN
overall_length8.250 INCHES NOMINAL IN
shank_diameter0.375 INCHES NOMINAL IN
fork_span_width0.140 INCHES NOMINAL IN
special_featuresEND ITEM 5840-01-042-9823,RADAR TRAINING SET,AN/MPQ-T3
style_designatorCLEVIS
fork_arm_thickness0.117 INCHES NOMINAL IN
nominal_thread_size0.164 INCHES SECURING PIN HOLE IN
NSN5330-00-358-9593
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 104239 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.060 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
PERIPHERAL DIAMETER: 2.625 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.250 INCHES MINIMUM AND 1.254 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.060 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLECUP
PERIPHERAL DIAMETER2.625 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.250 INCHES MINIMUM AND 1.254 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
07-104239Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 104239?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 104239?
104239 is a 104239. It is classified as a MRO (MRO_GENERAL).
What parts can replace 104239?
There is 1 known substitute for 104239: 07-104239. Substitute compatibility should be verified for your specific system.
What is the NSN for 104239?
104239 is cataloged in the U.S. Government catalog under NSN 5330-00-358-9593. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 104239

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.