PartsTable
Technical Data Sheet
Download PDF

10422 — DUMMY CONNECTOR,PLUG

✓ Government record, cited
Ugreen · NUT WASHER
PRODUCT OVERVIEW

10422: DUMMY CONNECTOR,PLUG.

UGREEN Mini Car Phone Holder – Maximize your convenience and safety on the road Allows you to easily switch the phone from vertical to horizontal. Fits snugly in the vent and won’t block your line of sight. Space is provided for charging, auxiliary and charging jacks are always accessible.

The extendable arm can hold the phone or device well in width from 65mm to 90mm. This car phone holder is compatible with the total thickness (phone + case) up to 11mm and total weights up to 300G Holds up your cellphone securely while allowing you to drive Without distraction. Perfect Protection The clip is made of high-quality silicone rubber with built-in metal manganese steel sheet, it will not damage the air outlet even if you use it every day.

360 Degree Adjustability Allow you to fix your phone to the optimal position for perfect viewing. Adjusting your phone to any angle you desire. Sturdy and Reliabl This part is cataloged in the U.S.

Government catalog under NSN 5310-00-011-5314, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
10422
NSN: 5310-00-011-5314
NIINs: 000115314, 001767208, 004430022, 005455406, 007646763, 008744951, 013754241, 013960898, 016428397
FSC: 5310 — Nuts and Washers
CAGE: 82423 — KLEINSCHMIDT INC (USA)
SPECIFICATIONS
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
body_shapeROUND
flow_angle45.0 DEGREES SECOND END
seat_angle37.0 DEGREES SECOND END
design_typeDRY
swage_depth0.021 INCHES IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
coolant_typeAIR
thread_class2B SECOND END
hole_diameter0.446 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN
tube_quantity1
exterior_colorBLACK
NSN5310-00-011-5314
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10422 · Ugreen ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-16232,TY Z MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 0.779 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PHOSPHATE OVERALL
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1070 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-16232,TY Z MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER0.779 INCHES MAXIMUM IN
MATERIAL THICKNESS0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
SURFACE TREATMENTPHOSPHATE OVERALL
MATERIALSTEEL COMP 1060 OR STEEL COMP 1070 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
HOLE DIAMETER0.446 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 6
MS35338-66Reference document
Same NSN cross-reference
Reference document — Secondary reference
115314Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFW84CLASSASTYLE2Reference document
Same NSN cross-reference
Reference document — Identification reference
SW25212Reference document
Same NSN cross-reference
Reference document — Secondary reference
004-003005-070Reference document
Same NSN cross-reference
Reference document — Secondary reference
7-16 RReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10422?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10422?
10422 is a DUMMY CONNECTOR,PLUG manufactured by Ugreen.
What parts can replace 10422?
There are 6 known substitutes for 10422: MS35338-66, 115314, FFW84CLASSASTYLE2 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10422?
10422 is cataloged in the U.S. Government catalog under NSN 5310-00-011-5314. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10422

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.