104194 — CLAMP,LOOP

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

104194: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include loop_inside_diameter: 12.750 INCHES NOMINAL IN, end_item_identification: RECCE AUTONOMOUS UNDERWATER VEHICLE, part_name_assigned_by_controlling_agency: CLAMP, RING ASSEMBLY. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-839-4513, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

104194

NSN: 5305-00-839-4513
NIINs: 008394513, 010670332, 015767685
FSC: 5305 — Screws
CAGE: 95750 — AIRCO REPUBLIC ELECTRONICS, INC. DIV THE AERONAUTICAL INSTRUMENT & RADIO CO (USA)

SPECIFICATIONS

loop_inside_diameter	12.750 INCHES NOMINAL IN
end_item_identification	RECCE AUTONOMOUS UNDERWATER VEHICLE
part_name_assigned_by_controlling_agency	CLAMP, RING ASSEMBLY
NSN	5305-00-839-4513

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.375 INCHES NOMINAL IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE

•

THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.138 INCHES IN

•

HEAD STYLE: FILLISTER

•

THREAD DIRECTION: RIGHT-HAND

•

SCREW MATERIAL: COPPER ALLOY

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
FASTENER LENGTH	0.375 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH	0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.138 INCHES IN
HEAD STYLE	FILLISTER
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	COPPER ALLOY
MINIMUM TENSILE STRENGTH	57000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLE	SLOT

SUBSTITUTES & CROSS-REFERENCES 4

5288749-5Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MS35273-28Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MS35271-28Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

6022197-1Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 104194?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 104194?

104194 is a CLAMP,LOOP.

What parts can replace 104194?

There are 4 known substitutes for 104194: 5288749-5, MS35273-28, MS35271-28 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 104194?

104194 is cataloged in the U.S. Government catalog under NSN 5305-00-839-4513. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

104194 — CLAMP,LOOP

Request a Quote — 104194