PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1041-7
1041-7 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include color: CLEAR LENS, length: 18.000 INCHES IN, material: STEEL CORROSION RESISTING, body_style: BARRIER TYPE, bore_shape: STRAIGHT, duty_cycle: CONTINUOUS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-3882, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1041-7
NSN: 5310-00-209-3882
FSC: 5310
CAGE: 82423 — KLEINSCHMIDT INC (USA)
SPECIFICATIONS
colorCLEAR LENS
length18.000 INCHES IN
materialSTEEL CORROSION RESISTING
body_styleBARRIER TYPE
bore_shapeSTRAIGHT
duty_cycleCONTINUOUS
flow_angle90.0 DEGREES
leg_length1.062 INCHES NOMINAL FIRST END IN
seat_angle37.0 DEGREES FIRST END
inscriptionCMPT'S TEMP,OUT OF TOL/HEATING MODEL,REQUIRED BACK
beveled_edgeINCLUDED
flange_width0.055 INCHES NOMINAL IN
NSN5310-00-209-3882
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1041-7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.375 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.894 INCHES MINIMUM AND 0.927 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL THICKNESS: 0.030 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
STYLE DESIGNATORFLAT INTERNAL TEETH
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OUTSIDE DIAMETER1.375 INCHES NOMINAL IN
HOLE DIAMETER0.894 INCHES MINIMUM AND 0.927 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIAL THICKNESS0.030 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
AU600Interchangeable
interchangeable cross-reference
interchangeable
104-17Interchangeable
interchangeable cross-reference
interchangeable
211LInterchangeable
interchangeable cross-reference
interchangeable
731740Interchangeable
interchangeable cross-reference
interchangeable
211GInterchangeable
interchangeable cross-reference
interchangeable
23916Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1041-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1041-7?
1041-7 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 1041-7?
There are 15 known substitutes for 1041-7: AU600, 104-17, 211L and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1041-7?
1041-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-3882. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1041-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026