PartsTable
Technical Data Sheet
104-22 ✓ Verified by PartsTable
Ugreen · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

<b>UGREEN Mini Car Phone Holder – Maximize your convenience and safety on the road</b><br><br>Allows you to easily switch the phone from vertical to horizontal.<br><br>Fits snugly in the vent and won’t block your line of sight.<br><br>Space is provided for charging, auxiliary and charging jacks are always accessible.<br><br>The extendable arm can hold the phone or device well in width from 65mm to 90mm.<br><br>This car phone holder is compatible with the total thickness (phone + case) up to 11mm and total weights up to 300G<br><br>Holds up your cellphone securely while allowing you to drive Without distraction.<br><br><b>Perfect Protection</b><br>The clip is made of high-quality silicone rubber with built-in metal manganese steel sheet, it will not damage the air outlet even if you use it every day.<br><br><b>360 Degree Adjustability</b><br>Allow you to fix your phone to the optimal position for perfect viewing. Adjusting your phone to any angle you desire.<br><br><b>Sturdy and Reliabl This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-011-5314, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
104-22
NSN: 5310-00-011-5314
FSC: 5310
CAGE: 82423 — KLEINSCHMIDT INC (USA)
SPECIFICATIONS
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
body_shapeROUND
flow_angle45.0 DEGREES SECOND END
seat_angle37.0 DEGREES SECOND END
design_typeDRY
swage_depth0.021 INCHES IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
coolant_typeAIR
thread_class2B SECOND END
hole_diameter0.446 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN
tube_quantity1
exterior_colorBLACK
NSN5310-00-011-5314
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 104-22 · Ugreen ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SURFACE TREATMENT: PHOSPHATE OVERALL
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
HOLE DIAMETER: 0.446 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1070 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL THICKNESS: 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
OUTSIDE DIAMETER: 0.779 INCHES MAXIMUM IN
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPHOSPHATE OVERALL
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
HOLE DIAMETER0.446 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1060 OR STEEL COMP 1070 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL THICKNESS0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.779 INCHES MAXIMUM IN
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-16232,TY Z MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
10-542-2Interchangeable
interchangeable cross-reference
interchangeable
1042-2Interchangeable
interchangeable cross-reference
interchangeable
160-1042-02-01-00Interchangeable
interchangeable cross-reference
interchangeable
ABT10422Interchangeable
interchangeable cross-reference
interchangeable
7409870Interchangeable
interchangeable cross-reference
interchangeable
N-5474Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 104-22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 104-22?
104-22 is a DUMMY CONNECTOR,PLUG manufactured by Ugreen.
What parts can replace 104-22?
There are 17 known substitutes for 104-22: 10-542-2, 1042-2, 160-1042-02-01-00 and 14 more. Substitute compatibility should be verified for your specific system.
Is 104-22 still available?
104-22 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 104-22