PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10396-03056
10396-03056 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

HARDWARE KIT,ELECTRONIC EQUIPMEN. Key specifications include end_item_identification: AIR ROUTE SURVEILLANCE RADAR 2 (ARSR2). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-532-9863, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10396-03056
NSN: 5340-01-532-9863
FSC: 5340
CAGE: 08125 — U S DEPT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION (USA)
SPECIFICATIONS
special_features3/4" THREAD DIAMETER,10 GRADE 8 BOLT (3.25"LONG); 3/4" THREAD DIAMETER, 10 GRADE 8 HEX NUTS; 3/4" THREAD DIAMETER-GRADE 8 LOCK WASHERS; 3/4" THREAD DIAMETER-GRADE 8 FLAT WASHERS
end_item_identificationAIR ROUTE SURVEILLANCE RADAR 2 (ARSR2)
NSN5340-01-532-9863
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10396-03056 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURES3/4" THREAD DIAMETER,10 GRADE 8 BOLT (3.25"LONG); 3/4" THREAD DIAMETER, 10 GRADE 8 HEX NUTS; 3/4" THREAD DIAMETER-GRADE 8 LOCK WASHERS; 3/4" THREAD DIAMETER-GRADE 8 FLAT WASHERS
END ITEM IDENTIFICATIONAIR ROUTE SURVEILLANCE RADAR 2 (ARSR2)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
0002Interchangeable
interchangeable cross-reference
interchangeable
WW-P-401Interchangeable
interchangeable cross-reference
interchangeable
6220/2"Interchangeable
interchangeable cross-reference
interchangeable
DPH7900-4-B(2.5)Interchangeable
interchangeable cross-reference
interchangeable
1064-2Interchangeable
interchangeable cross-reference
interchangeable
8-3550-80Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10396-03056?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10396-03056?
10396-03056 is a HARDWARE KIT,ELECTRONIC EQUIPMEN.
What parts can replace 10396-03056?
There are 8 known substitutes for 10396-03056: 0002, WW-P-401, 6220/2" and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10396-03056?
10396-03056 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-532-9863. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10396-03056

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026