PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10392408
10392408 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SUPPORT,SEAT,VEHICULAR is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5083, material_document_and_classification: QQ-A-200/4, ALLOY 5083 FED SPEC 1ST MATERIAL RESPONSE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-877-3412, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10392408
NSN: 5340-00-877-3412
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 5083
special_featuresMATERIAL TEMPER:H111, ITEM CONSISTS OF; ANGLE P/N 12299254-1, ANGLE P/N 12299254-2, ANGLE P/N 12299254-3. ADDITIONAL INFORMATION MAY BE OBTAINED FROM DRAWING 12299254, CAGE 19207
material_document_and_classificationQQ-A-200/4, ALLOY 5083 FED SPEC 1ST MATERIAL RESPONSE
NSN5340-00-877-3412
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10392408 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.1285 INCHES NOMINAL IN
•
HEIGHT: 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
•
FURNISHED ITEMS: LOCKNUT
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.1285 INCHES NOMINAL IN
HEIGHT0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
FURNISHED ITEMSLOCKNUT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
N351CD170Upgraded Successor
successor cross-reference
successor
C17Upgraded Successor
successor cross-reference
successor
CD170Upgraded Successor
successor cross-reference
successor
WC586Interchangeable
interchangeable cross-reference
interchangeable
14LC50Interchangeable
interchangeable cross-reference
interchangeable
3DC124Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10392408?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10392408?
10392408 is a SUPPORT,SEAT,VEHICULAR.
What parts can replace 10392408?
There are 12 known substitutes for 10392408: N351CD170, C17, CD170 and 9 more. Substitute compatibility should be verified for your specific system.
Is 10392408 still available?
10392408 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10392408

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026