PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10392337
10392337 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1012 OUTER RACE, bore_diameter: 0.5000 INCHES NOMINAL0.5000 INCHES NOMINAL IN, overall_width: 0.3650 INCHES MINIMUM AND 0.3650 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM0.3750 INCHES MAXIMUM IN, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELLNON-SEPARABLE, OPEN END, DRAWN SHELL, overall_outside_diameter: 0.6785 INCHES NOMINAL0.6785 INCHES NOMINAL IN, specification/standard_data: 60380-B-86 MANUFACTURERS SOURCE CONTROL60380-B-86 MANUFACTURERS SOURCE CONTROL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-136-1094, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10392337
NSN: 3110-01-136-1094
FSC: 3110
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL COMP 1012 OUTER RACE
bore_diameter0.5000 INCHES NOMINAL0.5000 INCHES NOMINAL IN
overall_width0.3650 INCHES MINIMUM AND 0.3650 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM0.3750 INCHES MAXIMUM IN
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELLNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.6785 INCHES NOMINAL0.6785 INCHES NOMINAL IN
specification/standard_data60380-B-86 MANUFACTURERS SOURCE CONTROL60380-B-86 MANUFACTURERS SOURCE CONTROL
standard_tolerance_designationABEC NO.1ABEC NO.1
NSN3110-01-136-1094
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10392337 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 0.6785 INCHES NOMINAL0.6785 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1ABEC NO.1
•
MATERIAL: STEEL COMP 1012 OUTER RACE
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELLNON-SEPARABLE, OPEN END, DRAWN SHELL
•
SPECIFICATION/STANDARD DATA: 60380-B-86 MANUFACTURERS SOURCE CONTROL60380-B-86 MANUFACTURERS SOURCE CONTROL
•
BORE DIAMETER: 0.5000 INCHES NOMINAL0.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER0.6785 INCHES NOMINAL0.6785 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1ABEC NO.1
MATERIALSTEEL COMP 1012 OUTER RACE
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELLNON-SEPARABLE, OPEN END, DRAWN SHELL
SPECIFICATION/STANDARD DATA60380-B-86 MANUFACTURERS SOURCE CONTROL60380-B-86 MANUFACTURERS SOURCE CONTROL
BORE DIAMETER0.5000 INCHES NOMINAL0.5000 INCHES NOMINAL IN
OVERALL WIDTH0.3650 INCHES MINIMUM AND 0.3650 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM0.3750 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
UD16Interchangeable
interchangeable cross-reference
interchangeable
784250Interchangeable
interchangeable cross-reference
interchangeable
0 241 319 512Interchangeable
interchangeable cross-reference
interchangeable
B86Interchangeable
interchangeable cross-reference
interchangeable
5895-381PC38Interchangeable
interchangeable cross-reference
interchangeable
5585734 PIECE 7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10392337?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10392337?
10392337 is a BEARING,ROLLER,NEEDLE.
What parts can replace 10392337?
There are 20 known substitutes for 10392337: UD16, 784250, 0 241 319 512 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10392337?
10392337 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-136-1094. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10392337

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026