PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 103788
103788 ✓ Verified by PartsTable
Hama · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

- Ideal for small digital cameras<br>- Zipper opening<br>- Belt loop<br>- Fleece compartment inside<br>- Flexible neoprene material. Key specifications include nonsupply_items_and_quantities: 82328 39126T GEAR WORM 1;82328 18815T GEAR WORM WHEEL 1. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3788, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
103788
NSN: 5315-00-010-3788
FSC: 5315
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
component_quantity2
nonsupply_items_and_quantities82328 39126T GEAR WORM 1;82328 18815T GEAR WORM WHEEL 1
NSN5315-00-010-3788
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 103788 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL DIAMETER: 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
FIRST END STYLE: CHAMFERED
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
PIN OVERALL LENGTH: 1.488 INCHES MINIMUM AND 1.512 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL DIAMETER0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
FIRST END STYLECHAMFERED
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
PIN OVERALL LENGTH1.488 INCHES MINIMUM AND 1.512 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
103788Interchangeable
interchangeable cross-reference
interchangeable
37F4Interchangeable
interchangeable cross-reference
interchangeable
0207-8-8Interchangeable
interchangeable cross-reference
interchangeable
SAE J514-3 8-8 140131CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 103788?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103788?
103788 is a ADAPTER,STRAIGHT,PIPE TO TUBE manufactured by Hama.
What parts can replace 103788?
There are 4 known substitutes for 103788: 103788, 37F4, 0207-8-8 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 103788?
103788 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3788. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103788

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026