PartsTable
Technical Data Sheet
Download PDF

103774 — NOZZLE,SPRAY,FLUID-EMULSION

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

103774: NOZZLE,SPRAY,FLUID-EMULSION.

The NOZZLE,SPRAY,FLUID-EMULSION is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, design_type: SOLID, end_diameter: 0.5680 INCHES MINIMUM AND 0.5690 INCHES MAXIMUM IN, bore_diameter: 0.6880 INCHES NOMINAL IN, thread_length: 1.000 INCHES NOMINAL IN, overall_height: 0.4652 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-355-4412, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 103774
NSN: 5340-00-355-4412
NIINs: 003554412, 009877177, 010481564, 015604475
FSC: 5340 — Hardware, Commercial
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialCOPPER ALLOY
design_typeSOLID
end_diameter0.5680 INCHES MINIMUM AND 0.5690 INCHES MAXIMUM IN
bore_diameter0.6880 INCHES NOMINAL IN
thread_length1.000 INCHES NOMINAL IN
overall_height0.4652 INCHES NOMINAL IN
overall_length0.938 INCHES NOMINAL IN
screw_materialSTEEL COMP 316
orifice_diameter0.052 INCHES NOMINAL IN
special_featuresDIA X NUMBER 10-32
first_step_diameter1.1090 INCHES NOMINAL IN
inlet_connection_size1/8 IN IN
NSN5340-00-355-4412
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 103774 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST STEP DIAMETER: 1.1090 INCHES NOMINAL IN
•
END DIAMETER: 0.5680 INCHES MINIMUM AND 0.5690 INCHES MAXIMUM IN
•
DISTANCE FROM END TO FIRST STEP: 0.4060 INCHES NOMINAL IN
•
DESIGN TYPE: SOLID
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108, GRADE 1010 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A575, GRADE 1010 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A576, GRADE 1010 ASSN STD SINGLE MATERIAL RESPONSE
•
BORE DIAMETER: 0.6880 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.4652 INCHES NOMINAL IN
FIRST STEP DIAMETER1.1090 INCHES NOMINAL IN
END DIAMETER0.5680 INCHES MINIMUM AND 0.5690 INCHES MAXIMUM IN
DISTANCE FROM END TO FIRST STEP0.4060 INCHES NOMINAL IN
DESIGN TYPESOLID
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108, GRADE 1010 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A575, GRADE 1010 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A576, GRADE 1010 ASSN STD SINGLE MATERIAL RESPONSE
SPECIAL FEATURESNOT CASEHARDENED
BORE DIAMETER0.6880 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 103774?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103774?
103774 is a NOZZLE,SPRAY,FLUID-EMULSION. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 103774?
103774 is cataloged in the U.S. Government catalog under NSN 5340-00-355-4412. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103774

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.