PartsTable
Technical Data Sheet
Download PDF

103768 — PANEL AND CONNECTOR

✓ Government record, cited
Hama · MRO · MRO_GENERAL
PRODUCT OVERVIEW

103768: PANEL AND CONNECTOR.

- For small digital cameras - Sturdy exterior shell made of EVA, for secure protection of the camera - Flat inside compartment for storage media - With removable neck strap and belt loop. Key specifications include material: STEEL COMP 301 OVERALL, stock_width: 8.200 INCHES NOMINAL IN, first_end_style: CHAMFERED, stock_thickness: 2.124 INCHES NOMINAL IN, pin_overall_length: 0.863 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN, pin_overall_diameter: 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-010-3768, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 103768
NSN: 5315-00-010-3768
NIINs: 000103768, 006248042, 011118214, 017071903
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL COMP 301 OVERALL
stock_width8.200 INCHES NOMINAL IN
first_end_styleCHAMFERED
stock_thickness2.124 INCHES NOMINAL IN
pin_overall_length0.863 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN
pin_overall_diameter0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
material_document_and_classificationMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
part_name_assigned_by_controlling_agencySUR-PREP 5606 LANDING GEAR STRUT WIPE
NSN5315-00-010-3768
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 103768 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A576 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A108 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.863 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1027 OR STEEL COMP 1030 OR STEEL COMP 1524 OVERALL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A576 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A108 ASSN STD 2ND MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.863 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1027 OR STEEL COMP 1030 OR STEEL COMP 1524 OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 103768?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103768?
103768 is a PANEL AND CONNECTOR manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 103768?
103768 is cataloged in the U.S. Government catalog under NSN 5315-00-010-3768. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103768

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.