PartsTable
Technical Data Sheet
PartsTable / MRO / 10375-4
10375-4 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The FRAME,ANGLE COUNTER is a the manufacturer industrial component. Key specifications include color: COLORLESS, shape: ROUND, degasser: NOT INCLUDED, governor: NOT INCLUDED, material: STEEL CORROSION RESISTING FLOW CONTROL DEVICE, body_width: 1.063 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3754, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10375-4
NSN: 5315-00-010-3754
FSC: 5315
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
colorCOLORLESS
shapeROUND
degasserNOT INCLUDED
governorNOT INCLUDED
materialSTEEL CORROSION RESISTING FLOW CONTROL DEVICE
body_width1.063 INCHES NOMINAL IN
float_typeSINGLE
glass_typeFLINT
seat_angle45.0 DEGREES SECOND END
body_height0.781 INCHES NOMINAL IN
body_length1.063 INCHES NOMINAL IN
closure_typeCAP
NSN5315-00-010-3754
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10375-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 1.000 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.3095 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
MATERIAL: STEEL OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
PIN OVERALL LENGTH1.000 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.3095 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
MATERIALSTEEL OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
321090Interchangeable
interchangeable cross-reference
interchangeable
8331227Interchangeable
interchangeable cross-reference
interchangeable
103754Interchangeable
interchangeable cross-reference
interchangeable
WC27500Interchangeable
interchangeable cross-reference
interchangeable
MIL-C-27500Interchangeable
interchangeable cross-reference
interchangeable
M1507E22U1-3-5- 9STWInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10375-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10375-4?
10375-4 is a FRAME,ANGLE COUNTER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10375-4?
There are 24 known substitutes for 10375-4: 321090, 8331227, 103754 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10375-4?
10375-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3754. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10375-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026