PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1037-06
1037-06 ✓ Verified by PartsTable
Hama · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

- Padded filter case with zip and belt loop<br>- Inside lining made of soft fleece<br>- For up to 4 filters with a filter diameter of up to 72 mm<br>- Max. Number of Filters: 4 Stck.<br>- Max. Diameter Filter: 720 mm<br>- Colour: Black This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3706, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1037-06
NSN: 5315-00-010-3706
FSC: 5315
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length0.613 INCHES MINIMUM AND 0.637 INCHES MAXIMUM IN
pin_overall_diameter0.1542 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.016 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-010-3706
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1037-06 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 0.613 INCHES MINIMUM AND 0.637 INCHES MAXIMUM IN
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
MATERIAL: STEEL OVERALL
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL DIAMETER: 0.1542 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH0.613 INCHES MINIMUM AND 0.637 INCHES MAXIMUM IN
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
MATERIALSTEEL OVERALL
FIRST END STYLECHAMFERED
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL DIAMETER0.1542 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
103706Interchangeable
interchangeable cross-reference
interchangeable
803Interchangeable
interchangeable cross-reference
interchangeable
A103706Interchangeable
interchangeable cross-reference
interchangeable
1037-05Interchangeable
interchangeable cross-reference
interchangeable
CM/103706Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1037-06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1037-06?
1037-06 is a SENSOR,ANTI-LOCK BRAKE,VEHICULAR manufactured by Hama.
What parts can replace 1037-06?
There are 5 known substitutes for 1037-06: 103706, 803, A103706 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1037-06?
1037-06 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3706. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1037-06

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026