PartsTable
Technical Data Sheet
Download PDF

103698 — INFLATOR,DIVER'S BUOYANCY COMPEN

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

103698: INFLATOR,DIVER'S BUOYANCY COMPEN.

INFLATOR,DIVER'S BUOYANCY COMPEN. Key specifications include end_item_identification: EBIS 4500 SYSTEM, part_name_assigned_by_controlling_agency: INFLATION SYSTEM COMPLETE. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-010-3698, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
103698
NSN: 5315-00-010-3698
NIINs: 000103698, 016779373
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
end_item_identificationEBIS 4500 SYSTEM
part_name_assigned_by_controlling_agencyINFLATION SYSTEM COMPLETE
NSN5315-00-010-3698
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 103698 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 1.488 INCHES MINIMUM AND 1.512 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
PIN OVERALL LENGTH1.488 INCHES MINIMUM AND 1.512 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
3202405Reference document
Same NSN cross-reference
Reference document — Secondary reference
19J328-92Reference document
Same NSN cross-reference
Reference document — Secondary reference
49J328PC92Reference document
Same NSN cross-reference
Reference document — Secondary reference
49J325PC152Reference document
Same NSN cross-reference
Reference document — Secondary reference
19J325PC152Reference document
Same NSN cross-reference
Reference document — Secondary reference
3234587Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 103698?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103698?
103698 is a INFLATOR,DIVER'S BUOYANCY COMPEN.
What parts can replace 103698?
There are 6 known substitutes for 103698: 3202405, 19J328-92, 49J328PC92 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 103698?
103698 is cataloged in the U.S. Government catalog under NSN 5315-00-010-3698. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103698

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.