PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 103695
103695 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 431 OVERALL, head_style: FLAT CHAMFER, head_height: 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.422 INCHES NOMINAL IN, thread_length: 0.290 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3695, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
103695
NSN: 5315-00-010-3695
FSC: 5315
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL COMP 431 OVERALL
head_styleFLAT CHAMFER
head_height0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.422 INCHES NOMINAL IN
thread_length0.290 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
shoulder_shapeROUND FIRST SHOULDER
fastener_length1.170 INCHES NOMINAL IN
first_end_styleCHAMFERED
shoulder_length0.875 INCHES MINIMUM AND 0.880 INCHES MAXIMUM FIRST SHOULDER IN
thread_directionRIGHT-HAND
shoulder_diameter0.249 INCHES NOMINAL FIRST SHOULDER IN
NSN5315-00-010-3695
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 103695 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
PIN OVERALL LENGTH: 1.113 INCHES MINIMUM AND 1.137 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
PIN OVERALL LENGTH1.113 INCHES MINIMUM AND 1.137 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
103695Interchangeable
interchangeable cross-reference
interchangeable
PL25TInterchangeable
interchangeable cross-reference
interchangeable
1001037N005-001Interchangeable
interchangeable cross-reference
interchangeable
41-205-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 103695?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103695?
103695 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 103695?
There are 4 known substitutes for 103695: 103695, PL25T, 1001037N005-001 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 103695?
103695 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3695. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103695

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026