PartsTable
Technical Data Sheet
Download PDF

10365-S-1032-36 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10365-S-1032-36: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thread_class: 2B, thread_length: 0.3125 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, overall_length: 8.00 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S), handle_clearance: 1.1875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-695-6037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10365-S-1032-36
NSN: 5340-01-695-6037
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thread_class2B
thread_length0.3125 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
overall_length8.00 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)
handle_clearance1.1875 INCHES NOMINAL IN
overall_diameter0.3125 INCHES NOMINAL IN
special_featuresFINISH-ELECTRO STATIC APPLIED BLACK EPOXY FINISH
style_designatorROUND
thread_directionRIGHT-HAND
nominal_thread_size10.0 INCHES IN
thread_tolerance_class2.0 INTERNAL
NSN5340-01-695-6037
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10365-S-1032-36 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD TOLERANCE CLASS: 2.0 INTERNAL
•
MOUNTING FACILITY QUANTITY: 2
•
OVERALL DIAMETER: 0.3125 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 8.00 INCHES NOMINAL IN
•
MOUNTING METHOD: THREADED HOLE(S)
•
THREAD LENGTH: 0.3125 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ROUND
TECHNICAL CHARACTERISTICS
THREAD TOLERANCE CLASS2.0 INTERNAL
MOUNTING FACILITY QUANTITY2
OVERALL DIAMETER0.3125 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH8.00 INCHES NOMINAL IN
MOUNTING METHODTHREADED HOLE(S)
THREAD LENGTH0.3125 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
STYLE DESIGNATORROUND
OVERALL LENGTH8.00 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE10.0 INCHES IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10365-S-1032-36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10365-S-1032-36?
10365-S-1032-36 is a HANDLE,BOW.
What is the NSN for 10365-S-1032-36?
10365-S-1032-36 is cataloged in the U.S. Government catalog under NSN 5340-01-695-6037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10365-S-1032-36

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.