PartsTable
Technical Data Sheet
Download PDF

10353-SS-1032-7 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10353-SS-1032-7: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thread_class: 2A A, overall_length: 4.563 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S), handle_clearance: 1.187 INCHES NOMINAL IN, style_designator: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-509-2965, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10353-SS-1032-7
NSN: 5340-01-509-2965
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thread_class2A A
overall_length4.563 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)
handle_clearance1.187 INCHES NOMINAL IN
style_designatorROUND
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
thread_quantity_per_inch32
mounting_facility_quantity2
material_document_and_classificationASTM-A582/A582M-1995B(R00)E1 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length4.250 INCHES NOMINAL IN
NSN5340-01-509-2965
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10353-SS-1032-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.250 INCHES NOMINAL IN
•
MOUNTING METHOD: THREADED HOLE(S)
•
STYLE DESIGNATOR: ROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM-A582/A582M-1995B(R00)E1 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
HANDLE CLEARANCE: 1.187 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.250 INCHES NOMINAL IN
MOUNTING METHODTHREADED HOLE(S)
STYLE DESIGNATORROUND
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-A582/A582M-1995B(R00)E1 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH4.563 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
HANDLE CLEARANCE1.187 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS2A A
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10353-SS-1032-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10353-SS-1032-7?
10353-SS-1032-7 is a HANDLE,BOW.
What is the NSN for 10353-SS-1032-7?
10353-SS-1032-7 is cataloged in the U.S. Government catalog under NSN 5340-01-509-2965. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10353-SS-1032-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.