PartsTable
Technical Data Sheet
Download PDF

10353-1B — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10353-1B: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.107 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN, overall_height: 0.042 INCHES NOMINAL IN, outside_diameter: 0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN, surface_treatment: NICKEL OVERALL, material_thickness: 0.0106 INCHES MINIMUM AND 0.0146 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-271-8500, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10353-1B
NSN: 5310-00-271-8500
FSC: 5310 — Nuts and Washers
CAGE: 00781 — CESSNA AIRCRAFT CO ARC AVIONICS DIV (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.107 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
overall_height0.042 INCHES NOMINAL IN
outside_diameter0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
surface_treatmentNICKEL OVERALL
material_thickness0.0106 INCHES MINIMUM AND 0.0146 INCHES MAXIMUM IN
NSN5310-00-271-8500
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10353-1B · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.0106 INCHES MINIMUM AND 0.0146 INCHES MAXIMUM IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
MATERIAL: COPPER ALLOY OVERALL
•
HOLE DIAMETER: 0.107 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.042 INCHES NOMINAL IN
OUTSIDE DIAMETER0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
MATERIAL THICKNESS0.0106 INCHES MINIMUM AND 0.0146 INCHES MAXIMUM IN
SURFACE TREATMENTNICKEL OVERALL
MATERIALCOPPER ALLOY OVERALL
HOLE DIAMETER0.107 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
1660-039671205Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10353-1B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10353-1B?
10353-1B is a WASHER,SPRING TENSION.
What parts can replace 10353-1B?
There is 1 known substitute for 10353-1B: 1660-039671205. Substitute compatibility should be verified for your specific system.
What is the NSN for 10353-1B?
10353-1B is cataloged in the U.S. Government catalog under NSN 5310-00-271-8500. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10353-1B

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.