PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1035052-10
1035052-10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.050 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-724-4327, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1035052-10
NSN: 5340-00-724-4327
FSC: 5340
CAGE: 59364 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - TEMPE (WEST WARNER ROAD) (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.750 INCHES NOMINAL IN
material_document_and_classificationF-10001,E I DUPONT DE NEMOURS AND CO INC MFR REF SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.921 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.718 INCHES NOMINAL IN
NSN5340-00-724-4327
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1035052-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: F-10001,E I DUPONT DE NEMOURS AND CO INC MFR REF SINGLE MATERIAL RESPONSE BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
STYLE DESIGNATOR: SINGLE LOOP
•
LOOP INSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.718 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONF-10001,E I DUPONT DE NEMOURS AND CO INC MFR REF SINGLE MATERIAL RESPONSE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
STYLE DESIGNATORSINGLE LOOP
LOOP INSIDE DIAMETER0.750 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.718 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.921 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
781Upgraded Successor
successor cross-reference
successor
5598407-1Upgraded Successor
successor cross-reference
successor
5360Interchangeable
interchangeable cross-reference
interchangeable
MILB18TYPEBA31Interchangeable
interchangeable cross-reference
interchangeable
6714Interchangeable
interchangeable cross-reference
interchangeable
XTRABOND 250 PREMIER INDUSTRIALInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1035052-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1035052-10?
1035052-10 is a CLAMP,LOOP.
What parts can replace 1035052-10?
There are 17 known substitutes for 1035052-10: 781, 5598407-1, 5360 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1035052-10?
1035052-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-724-4327. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1035052-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026