PartsTable / COMPONENT / 103471R1
103471R1
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include construction: SOLID, end_cut_angle: 45.0 DEGREES, overall_length: 20.281 INCHES MINIMUM AND 20.375 INCHES MAXIMUM IN, style_designator: STRIP, fabrication_method: SOLID, cross-sectional_width: 0.812 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-737-2720, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
103471R1
NSN: 5330-00-737-2720 FSC: 5330 CAGE: 89346 — NAVISTAR INTL CORP TRUCK BR OHIO PLANT (USA)
SPECIFICATIONS
material RUBBER ETHYLENE-PROPYLENE CLASS EPM OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OVERALL construction SOLID end_cut_angle 45.0 DEGREES overall_length 20.281 INCHES MINIMUM AND 20.375 INCHES MAXIMUM IN style_designator STRIP fabrication_method SOLID cross-sectional_width 0.812 INCHES NOMINAL IN cross-sectional_height 0.688 INCHES NOMINAL IN material_document_and_classification ASTM D2000 3BA720 ASSN STD ALL MATERIAL RESPONSES OVERALL NSN 5330-00-737-2720
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 103471R1
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL WIDTH: 0.812 INCHES NOMINAL IN
• MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OVERALL
• FABRICATION METHOD: SOLID
• END CUT ANGLE: 45.0 DEGREES
• CROSS-SECTIONAL HEIGHT: 0.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL WIDTH 0.812 INCHES NOMINAL IN MATERIAL RUBBER ETHYLENE-PROPYLENE CLASS EPM OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OVERALL FABRICATION METHOD SOLID CONSTRUCTION SOLID END CUT ANGLE 45.0 DEGREES STYLE DESIGNATOR STRIP OVERALL LENGTH 20.281 INCHES MINIMUM AND 20.375 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.688 INCHES NOMINAL IN MATERIAL DOCUMENT AND CLASSIFICATION ASTM D2000 3BA720 ASSN STD ALL MATERIAL RESPONSES OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
6604-1 Interchangeable interchangeable cross-reference
interchangeable
473348-5 Interchangeable interchangeable cross-reference
interchangeable
RS5J9 Interchangeable interchangeable cross-reference
interchangeable
SR10564A1 Interchangeable interchangeable cross-reference
interchangeable
14-13902-1 Interchangeable interchangeable cross-reference
interchangeable
M7230 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 103471R1?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103471R1?
103471R1 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace 103471R1?
There are 10 known substitutes for 103471R1: 6604-1, 473348-5, RS5J9 and 7 more. Substitute compatibility should be verified for your specific system.
Is 103471R1 still available?
103471R1 is currently cancelled.
Request a Quote — 103471R1