PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10342875
10342875 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT B, case_style: RECESSED, seal_width: 0.375 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, outside_diameter: 3.005 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-603-2320, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10342875
NSN: 5330-00-603-2320
FSC: 5330
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT B
case_styleRECESSED
seal_width0.375 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
outside_diameter3.005 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter3.000 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter2.125 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-603-2320
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10342875 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PLASTIC CASE
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 2.125 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
SEALING ELEMENT STYLE: ANGULAR-OPPOSED
•
HOUSING BORE DIAMETER: 3.000 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPLASTIC CASE
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER2.125 INCHES NOMINAL IN
MATERIALSTEEL CASE
SEALING ELEMENT STYLEANGULAR-OPPOSED
HOUSING BORE DIAMETER3.000 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
SEAL WIDTH0.375 INCHES NOMINAL IN
OUTSIDE DIAMETER3.005 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
472015Interchangeable
interchangeable cross-reference
interchangeable
137-0085-070Interchangeable
interchangeable cross-reference
interchangeable
155314Interchangeable
interchangeable cross-reference
interchangeable
S9400-921906PC4Interchangeable
interchangeable cross-reference
interchangeable
21164Interchangeable
interchangeable cross-reference
interchangeable
4552-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10342875?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10342875?
10342875 is a SEAL,PLAIN ENCASED.
What parts can replace 10342875?
There are 14 known substitutes for 10342875: 472015, 137-0085-070, 155314 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10342875?
10342875 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-603-2320. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10342875

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026