PartsTable
Technical Data Sheet
Download PDF

10340192 — PIN,COTTER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10340192: PIN,COTTER.

The PIN,COTTER is a the manufacturer industrial component. Key specifications include diameter: 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, material: STEEL OVERALL, point_type: EXTENDED PRONG MITRE END, special_features: HOLE DRILL SIZE: 0.078 INCH;FINISH: ZINC PLATED IN, style_designator: STANDARD, underloop_length: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-580-5515, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10340192
NSN: 5315-01-580-5515
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
diameter0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
materialSTEEL OVERALL
point_typeEXTENDED PRONG MITRE END
special_featuresHOLE DRILL SIZE: 0.078 INCH;FINISH: ZINC PLATED IN
style_designatorSTANDARD
underloop_length0.500 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
end_item_identification5855-01-573-2483;SIGHT,THERMAL
part_name_assigned_by_controlling_agencyPIN,COTTER
NSN5315-01-580-5515
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10340192 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STANDARD
•
DIAMETER: 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
•
UNDERLOOP LENGTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSTANDARD
DIAMETER0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
SPECIAL FEATURESHOLE DRILL SIZE: 0.078 INCH;FINISH: ZINC PLATED IN
SURFACE TREATMENTZINC OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYPIN,COTTER
END ITEM IDENTIFICATION5855-01-573-2483;SIGHT,THERMAL
UNDERLOOP LENGTH0.500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
POINT TYPEEXTENDED PRONG MITRE END
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
A-9C33-0208Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10340192?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10340192?
10340192 is a PIN,COTTER.
What parts can replace 10340192?
There is 1 known substitute for 10340192: A-9C33-0208. Substitute compatibility should be verified for your specific system.
What is the NSN for 10340192?
10340192 is cataloged in the U.S. Government catalog under NSN 5315-01-580-5515. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10340192