PartsTable
Technical Data Sheet
Download PDF

1034-D806-2 NON-ASBESTOS — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1034-D806-2 NON-ASBESTOS: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include overall_width: 1.500 INCHES NOMINAL IN, overall_length: 21.500 INCHES NOMINAL IN, special_features: CONTAINS NON-ASB ESTOS MATERIAL, style_designator: RECTANGULAR, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, environmental_attribute_code: ASBESTOS ALTERNATIVE PRODUCTS. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-449-4342, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1034-D806-2 NON-ASBESTOS
NSN: 5330-01-449-4342
FSC: 5330 — Packing and Gasket Materials
CAGE: 60756 — CEPEDA ASSOCIATES, INC. DBA CEPEDA ASSOCIATES INC (USA)
SPECIFICATIONS
overall_width1.500 INCHES NOMINAL IN
overall_length21.500 INCHES NOMINAL IN
special_featuresCONTAINS NON-ASB ESTOS MATERIAL
style_designatorRECTANGULAR
cross-sectional_thickness0.062 INCHES NOMINAL IN
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-449-4342
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1034-D806-2 NON-ASBESTOS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
OVERALL LENGTH21.500 INCHES NOMINAL IN
OVERALL WIDTH1.500 INCHES NOMINAL IN
SPECIAL FEATURESCONTAINS NON-ASB ESTOS MATERIAL
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
C5515-545-37 NON-ASBESTOSReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1034-D806-2 NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1034-D806-2 NON-ASBESTOS?
1034-D806-2 NON-ASBESTOS is a GASKET.
What parts can replace 1034-D806-2 NON-ASBESTOS?
There is 1 known substitute for 1034-D806-2 NON-ASBESTOS: C5515-545-37 NON-ASBESTOS. Substitute compatibility should be verified for your specific system.
What is the NSN for 1034-D806-2 NON-ASBESTOS?
1034-D806-2 NON-ASBESTOS is cataloged in the U.S. Government catalog under NSN 5330-01-449-4342. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1034-D806-2 NON-ASBESTOS