PartsTable
Technical Data Sheet
Download PDF

103393 — GEAR AND DISK SUBAS

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

103393: GEAR AND DISK SUBAS.

The GEAR AND DISK SUBAS is a the manufacturer industrial component. Key specifications include diameter: 0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, material: RUBBER, point_type: EXTENDED PRONG SQUARE CUT, usage_design: FLOATATION VEST, style_designator: STANDARD, underloop_length: 2.875 INCHES MINIMUM AND 3.125 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-059-0187, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 103393
NSN: 5315-00-059-0187
NIINs: 000590187, 008761874, 015194409, 016910351
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
diameter0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
materialRUBBER
point_typeEXTENDED PRONG SQUARE CUT
usage_designFLOATATION VEST
style_designatorSTANDARD
underloop_length2.875 INCHES MINIMUM AND 3.125 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
center_hole_diameter7.090 INCHES NOMINAL IN
end_item_identificationVEST-AEGIR 59 AND FATSO (VSWR-BSH000588)
cross-sectional_shape_styleV
material_document_and_classificationASTM E30 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyBLADDER,FLOATATION
NSN5315-00-059-0187
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 103393 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: STANDARD
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM E30 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
UNDERLOOP LENGTH: 2.875 INCHES MINIMUM AND 3.125 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
POINT TYPE: EXTENDED PRONG SQUARE CUT
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORSTANDARD
MATERIAL DOCUMENT AND CLASSIFICATIONASTM E30 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
UNDERLOOP LENGTH2.875 INCHES MINIMUM AND 3.125 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
POINT TYPEEXTENDED PRONG SQUARE CUT
SUBSTITUTES & CROSS-REFERENCES 8
122-6600344 SH 8 PC 32Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
70000-363Reference document
Same NSN cross-reference
Reference document — Secondary reference
122-6600360 PC 27Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
901242K36Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
6X56Reference document
Same NSN cross-reference
Reference document — Secondary reference
DX223BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 103393?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103393?
103393 is a GEAR AND DISK SUBAS. It is classified as a MRO (MRO_GENERAL).
What parts can replace 103393?
There are 8 known substitutes for 103393: 122-6600344 SH 8 PC 32, 70000-363, 122-6600360 PC 27 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 103393?
103393 is cataloged in the U.S. Government catalog under NSN 5315-00-059-0187. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103393

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.