PartsTable
Technical Data Sheet
PartsTable / MRO / 10337-1
10337-1 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The 10337-1 is a the manufacturer industrial component. Key specifications include diameter: 0.062 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, body_style: CHASSIS TYPE, shell_type: SOLID, terminal_type: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING, overall_height: 0.844 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3371, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10337-1
NSN: 5315-00-010-3371
FSC: 5315
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
diameter0.062 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
body_styleCHASSIS TYPE
shell_typeSOLID
terminal_typeSOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
overall_height0.844 INCHES NOMINAL IN
shell_materialALUMINUM ALLOY
insert_materialPLASTIC POLYAMIDE NYLON SINGLE MATING END
inside_diameter2.750 INCHES NOMINAL IN
contact_materialCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
outside_diameter3.248 INCHES NOMINAL IN
style_designatorPLAIN FLANGED
NSN5315-00-010-3371
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10337-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 1008 OVERALL
•
DIAMETER: 0.062 INCHES NOMINAL IN
•
UNDERLOOP LENGTH: 3.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1008 OVERALL
DIAMETER0.062 INCHES NOMINAL IN
UNDERLOOP LENGTH3.000 INCHES NOMINAL IN
STYLE DESIGNATORSTANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
103371Interchangeable
interchangeable cross-reference
interchangeable
10337Interchangeable
interchangeable cross-reference
interchangeable
66451000-DS-G-66477 PC8Interchangeable
interchangeable cross-reference
interchangeable
DS-G-66477 PIECE 8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10337-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10337-1?
10337-1 is a 10337-1. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10337-1?
There are 4 known substitutes for 10337-1: 103371, 10337, 66451000-DS-G-66477 PC8 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10337-1?
10337-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3371. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10337-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026