PartsTable
Technical Data Sheet
PartsTable / MRO / 103322
103322 ✓ Verified by PartsTable
Bosch · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CLEANING WIRE ASSEMBLY is a Bosch industrial component. Key specifications include hole_diameter: 0.446 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 0.779 INCHES MAXIMUM IN, special_features: WEAPON SYSTEM ESSENTIAL, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: CADMIUM OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-0965, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 103322
NSN: 5310-00-209-0965
FSC: 5310
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
hole_diameter0.446 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter0.779 INCHES MAXIMUM IN
special_featuresWEAPON SYSTEM ESSENTIAL
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentCADMIUM OVERALL
material_thickness0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
end_item_identification2320-01-097-0260 HEMTT (HEAVY EXPANDED MOBILITY TACTICAL TRUCK)
criticality_code_justificationFEAT
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
general_characteristics_item_descriptionASSEMBLY CONSISTS OF 1 EA.SLOTTED ADJUSTING SCREW O.250 IN. OD,1.500 IN. LG,8-32 UNC,0.125 IN. THD. LG;1 EA. FINE STEEL WIRE 0.010 IN. OD,1.000 IN. LG,ATTACHED TO INSIDE OF SCREW IN
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-209-0965
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 103322 · Bosch ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
OUTSIDE DIAMETER: 0.779 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.446 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
END ITEM IDENTIFICATIONMRAP BUFFALO MK2A2; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE; ARMORED MULTI-PURPOSE VEHICLE (AMPV)
CRITICALITY CODE JUSTIFICATIONFEAT
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
SPECIAL FEATURESWEAPON SYSTEM ESSENTIAL
OUTSIDE DIAMETER0.779 INCHES MAXIMUM IN
HOLE DIAMETER0.446 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN
MATERIAL THICKNESS0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
MFF18X000F39200FInterchangeable
interchangeable cross-reference
interchangeable
476-49Interchangeable
interchangeable cross-reference
interchangeable
321-1249-00Interchangeable
interchangeable cross-reference
interchangeable
80569Interchangeable
interchangeable cross-reference
interchangeable
6141280Interchangeable
interchangeable cross-reference
interchangeable
R21559Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 103322?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103322?
103322 is a CLEANING WIRE ASSEMBLY manufactured by Bosch. It is classified as a MRO (MRO_GENERAL).
What parts can replace 103322?
There are 33 known substitutes for 103322: MFF18X000F39200F, 476-49, 321-1249-00 and 30 more. Substitute compatibility should be verified for your specific system.
Is 103322 still available?
103322 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103322

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026