PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 103250SS1032-7
103250SS1032-7 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_length: 3.312 INCHES NOMINAL IN, handle_clearance: 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL, nominal_thread_size: 0.190 INCHES IN, thread_series_designator: UNF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-330-7835, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
103250SS1032-7
NSN: 5340-01-330-7835
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length3.312 INCHES NOMINAL IN
handle_clearance1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationASTM A581,TYPE XM-1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
NSN5340-01-330-7835
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 103250SS1032-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A581,TYPE XM-1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
MOUNTING FACILITY QUANTITY: 2
•
THREAD SERIES DESIGNATOR: UNF
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH3.312 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A581,TYPE XM-1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE0.190 INCHES IN
MOUNTING FACILITY QUANTITY2
THREAD SERIES DESIGNATORUNF
HANDLE CLEARANCE1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
5041-13Upgraded Successor
successor cross-reference
successor
TE-11000-5-9Upgraded Successor
successor cross-reference
successor
752759-9Upgraded Successor
successor cross-reference
successor
10325-SS-1032-7Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 103250SS1032-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103250SS1032-7?
103250SS1032-7 is a HANDLE,BOW.
What parts can replace 103250SS1032-7?
There are 4 known substitutes for 103250SS1032-7: 5041-13, TE-11000-5-9, 752759-9 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 103250SS1032-7?
103250SS1032-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-330-7835. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103250SS1032-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026