PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 103131-1
103131-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RUBBER STRIP is a the manufacturer industrial component. Key specifications include color: ORANGE TAN BOTH SIDES, length: 180.000 INCHES NOMINAL IN, material: RUBBER SILICONE CLASS Q, temp_rating: -100.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF, special_features: PRESSURE SENSITIVE ADHESIVE ONE SIDE, cross-sectional_width: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-292-8408, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
103131-1
NSN: 5330-01-292-8408
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
colorORANGE TAN BOTH SIDES
length180.000 INCHES NOMINAL IN
materialRUBBER SILICONE CLASS Q
temp_rating-100.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
special_featuresPRESSURE SENSITIVE ADHESIVE ONE SIDE
cross-sectional_width0.500 INCHES NOMINAL IN
cross-sectional_height0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
minimum_tensile_strengthERR-060
cross-sectional_shape_styleRECTANGULAR
NSN5330-01-292-8408
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 103131-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -100.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
•
LENGTH: 180.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
CROSS-SECTIONAL WIDTH: 0.500 INCHES NOMINAL IN
•
MINIMUM TENSILE STRENGTH: ERR-060
•
CROSS-SECTIONAL HEIGHT: 0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
•
COLOR: ORANGE TAN BOTH SIDES
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-100.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
LENGTH180.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
CROSS-SECTIONAL WIDTH0.500 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTHERR-060
CROSS-SECTIONAL HEIGHT0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
SPECIAL FEATURESPRESSURE SENSITIVE ADHESIVE ONE SIDE
COLORORANGE TAN BOTH SIDES
MATERIALRUBBER SILICONE CLASS Q
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
103131Interchangeable
interchangeable cross-reference
interchangeable
1103888Interchangeable
interchangeable cross-reference
interchangeable
HL5838Interchangeable
interchangeable cross-reference
interchangeable
100SPAInterchangeable
Same NIIN cross-reference
interchangeable
100SPSPSAInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 103131-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103131-1?
103131-1 is a RUBBER STRIP.
What parts can replace 103131-1?
There are 5 known substitutes for 103131-1: 103131, 1103888, HL5838 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 103131-1?
103131-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-292-8408. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103131-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026