PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1030DW30FFSET
1030DW30FFSET ✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The NUT,CAP,DUAL WHEEL MOUNTING is a the manufacturer industrial component. Key specifications include material: STEEL, link_plate_width: 1.625 INCHES NOMINAL IN, fsc_application_data: TRACK DRIVE GROUP,CRAWLER MOUNTED CRANE, minimum_tensile_strength: 28000 POUNDS PER SQUARE INCH LBS, link_pin_nominal_diameter: 0.6250 INCHES IN, link_roller_nominal_diameter: 1.2500 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3020-00-496-1301, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1030DW30FFSET
NSN: 3020-00-496-1301
FSC: 3020
CAGE: 11406 — REXNORD HOLDINGS INC (USA)
SPECIFICATIONS
materialSTEEL
link_plate_width1.625 INCHES NOMINAL IN
fsc_application_dataTRACK DRIVE GROUP,CRAWLER MOUNTED CRANE
minimum_tensile_strength28000 POUNDS PER SQUARE INCH LBS
link_pin_nominal_diameter0.6250 INCHES IN
link_roller_nominal_diameter1.2500 INCHES IN
link_nominal_width_between_plates1.5000 INCHES IN
NSN3020-00-496-1301
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available NUT,CAP,DUAL WHEEL MOUNTING TITLE COMPONENT PN 1030DW30FFSET MFR NUT,CAP,DUAL WHEEL MOU
KEY FEATURES
•
LINK ROLLER NOMINAL DIAMETER: 1.2500 INCHES IN
•
MINIMUM TENSILE STRENGTH: 28000 POUNDS PER SQUARE INCH LBS
•
MATERIAL: STEEL
•
LINK NOMINAL WIDTH BETWEEN PLATES: 1.5000 INCHES IN
•
FSC APPLICATION DATA: TRACK DRIVE GROUP,CRAWLER MOUNTED CRANE
•
LINK PLATE WIDTH: 1.625 INCHES NOMINAL IN
•
LINK PIN NOMINAL DIAMETER: 0.6250 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
LINK ROLLER NOMINAL DIAMETER1.2500 INCHES IN
MINIMUM TENSILE STRENGTH28000 POUNDS PER SQUARE INCH LBS
MATERIALSTEEL
LINK NOMINAL WIDTH BETWEEN PLATES1.5000 INCHES IN
FSC APPLICATION DATATRACK DRIVE GROUP,CRAWLER MOUNTED CRANE
LINK PLATE WIDTH1.625 INCHES NOMINAL IN
LINK PIN NOMINAL DIAMETER0.6250 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
SW34048Interchangeable
interchangeable cross-reference
interchangeable
SW34048-1Interchangeable
interchangeable cross-reference
interchangeable
788HXInterchangeable
interchangeable cross-reference
interchangeable
86FT180Interchangeable
interchangeable cross-reference
interchangeable
24114Interchangeable
interchangeable cross-reference
interchangeable
11287Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1030DW30FFSET?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1030DW30FFSET?
1030DW30FFSET is a NUT,CAP,DUAL WHEEL MOUNTING.
What parts can replace 1030DW30FFSET?
There are 16 known substitutes for 1030DW30FFSET: SW34048, SW34048-1, 788HX and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1030DW30FFSET?
1030DW30FFSET is cataloged in the Federal Logistics Information System (FLIS) under NSN 3020-00-496-1301. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1030DW30FFSET

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026