PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10302C
10302C ✓ Verified by PartsTable
ATGBICS · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

ATGBICS Extreme Enterasys compatible 10302 SFP+ 10GBase-LR form factor network transceiver supports a distance of up to 10km over single-mode fibre (SMF) using a wavelength of 1310nm via an LC Duplex connector. This product operates within a commercial temperature range. Digital optical monitoring (DOM) support is also present enabling real-time monitoring of the parameters of the fibre optic transceiver.

Our product meets the specification of Extreme Enterasys 10302 and we proudly offer a compatibility guarantee and limited lifetime warranty. Our rigorously tested products record a unique traceable serial number and are fully compliant with all MSA (Multi-Source Agreement) and IEEE standards & protocols. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-282-3642, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
10302C
NSN: 5315-00-282-3642
FSC: 5315
CAGE: 2C085 — COLT CANADA CORPORATION (CAN)
SPECIFICATIONS
diameter0.062 INCHES NOMINAL IN
materialSTEEL OVERALL
overall_length0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
hardness_rating46.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSLOTTED
surface_treatmentPHOSPHATE ZINC OVERALL
material_thickness0.012 INCHES NOMINAL IN
material_document_and_classification66,COMP 1070 THRU 1095 FED STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-C-16232,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-282-3642
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10302C · ATGBICS ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SLOTTED
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
•
DIAMETER: 0.062 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66,COMP 1070 THRU 1095 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-16232,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: PHOSPHATE ZINC OVERALL
•
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSLOTTED
OVERALL LENGTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
MATERIAL THICKNESS0.012 INCHES NOMINAL IN
DIAMETER0.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION66,COMP 1070 THRU 1095 FED STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-16232,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPHOSPHATE ZINC OVERALL
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
S2501Interchangeable
interchangeable cross-reference
interchangeable
HW-E0109-003Interchangeable
interchangeable cross-reference
interchangeable
95101Interchangeable
interchangeable cross-reference
interchangeable
586-671Interchangeable
interchangeable cross-reference
interchangeable
Z111095101Interchangeable
interchangeable cross-reference
interchangeable
ASME B94.19Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10302C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10302C?
10302C is a PIN,SPRING manufactured by ATGBICS.
What parts can replace 10302C?
There are 19 known substitutes for 10302C: S2501, HW-E0109-003, 95101 and 16 more. Substitute compatibility should be verified for your specific system.
Is 10302C still available?
10302C is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10302C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026