PartsTable
Technical Data Sheet
PartsTable / MRO / 1030-26
1030-26 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RELAY,ELECTROMAGNETIC is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, thickness: 0.032 INCHES NOMINAL IN, nut_height: 0.330 INCHES NOMINAL IN, thread_class: 2B, hole_diameter: 0.143 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-011-7049, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1030-26
NSN: 5310-00-011-7049
FSC: 5310
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
thickness0.032 INCHES NOMINAL IN
nut_height0.330 INCHES NOMINAL IN
thread_class2B
hole_diameter0.143 INCHES NOMINAL IN
thread_seriesUNF
overall_diameter0.267 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_across_flats0.557 INCHES NOMINAL IN
nominal_thread_size0.375 INCHES IN
bearing_surface_typeCHAMFERED
NSN5310-00-011-7049
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1030-26 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT HEIGHT: 0.320 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
THREAD QUANTITY PER INCH: 24
•
THREAD SERIES: UNF
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 4 STYLE
•
WIDTH ACROSS FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
NUT HEIGHT0.320 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
THREAD QUANTITY PER INCH24
THREAD SERIESUNF
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 4 STYLE
WIDTH ACROSS FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY THREAD CLASS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
N-16Interchangeable
interchangeable cross-reference
interchangeable
6534C519-1Interchangeable
interchangeable cross-reference
interchangeable
64-7-9-503Interchangeable
interchangeable cross-reference
interchangeable
X420Interchangeable
interchangeable cross-reference
interchangeable
350HInterchangeable
interchangeable cross-reference
interchangeable
N100SInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1030-26?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1030-26?
1030-26 is a RELAY,ELECTROMAGNETIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1030-26?
There are 25 known substitutes for 1030-26: N-16, 6534C519-1, 64-7-9-503 and 22 more. Substitute compatibility should be verified for your specific system.
Is 1030-26 still available?
1030-26 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1030-26

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026