PartsTable
Technical Data Sheet
PartsTable / MRO / 103-72-8
103-72-8 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

- For an SLR camera with accessories.<br>- Material mix with attractive imprint.<br>- Main compartment with zipper opening.<br>- Flat zipped compartment under and on the lid.<br>- Flat zipped compartment on the back.<br>- Adjustable, padded shoulder strap.<br>- Handle.<br>- Feet.<br>- 3 inner dividers.<br>- Colour: Black/White.<br>- Line: Crop.<br>- Material: Polyurethan (PU).<br>- Usage: Photo/Video.<br>- Weight: 350 g.<br>- Inside Dimension Width: 20 cm.<br>- Inside Dimension Depth: 14 cm.<br>- Inside Dimension Height: 14 cm. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3728, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 103-72-8
NSN: 5315-00-010-3728
FSC: 5315
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialCOPPER ALLOY 360 OVERALL
body_stylePLAIN, SOLID
tooth_formSTANDARD
overall_length7.063 INCHES MINIMUM AND 7.187 INCHES MAXIMUM IN
pitch_diameter0.5000 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
teeth_quantity24
first_end_styleCHAMFERED
terminal_length1.375 INCHES MINIMUM IN
overall_diameter1.25 INCHES NOMINAL IN
style_designatorPROTRUDING HUB
attachment_methodMOUNTING HOLE
NSN5315-00-010-3728
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 103-72-8 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END STYLE: CHAMFERED
•
PIN OVERALL DIAMETER: 0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
MATERIAL: STEEL OVERALL
•
PIN OVERALL LENGTH: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END STYLECHAMFERED
PIN OVERALL DIAMETER0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
MATERIALSTEEL OVERALL
PIN OVERALL LENGTH1.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
99-66Interchangeable
interchangeable cross-reference
interchangeable
3-699Interchangeable
interchangeable cross-reference
interchangeable
GLD7313Interchangeable
interchangeable cross-reference
interchangeable
46-056918-03Interchangeable
interchangeable cross-reference
interchangeable
922616-0001-000Interchangeable
interchangeable cross-reference
interchangeable
3221Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 103-72-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103-72-8?
103-72-8 is a FUSE LINK,ELECTRICAL manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 103-72-8?
There are 22 known substitutes for 103-72-8: 99-66, 3-699, GLD7313 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 103-72-8?
103-72-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3728. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103-72-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026