PartsTable / COMPONENT / 103-5470
103-5470
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY CASE, design_type: LOOP ENGAGING, hole_diameter: 0.204 INCHES NOMINAL IN, overall_width: 2.188 INCHES NOMINAL IN, overall_height: 0.688 INCHES NOMINAL IN, overall_length: 5.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-196-4890, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
103-5470
NSN: 5340-00-196-4890 FSC: 5340 CAGE: 62323 — CONAX FLORIDA CORPORATION (USA)
SPECIFICATIONS
material COPPER ALLOY CASE design_type LOOP ENGAGING hole_diameter 0.204 INCHES NOMINAL IN hole_quantity 3 overall_width 2.188 INCHES NOMINAL IN overall_height 0.688 INCHES NOMINAL IN overall_length 5.000 INCHES NOMINAL IN style_designator LEVEL surface_treatment CADMIUM CASE engaging_surface_width 0.875 INCHES NOMINAL IN engaging_surface_thickness 0.250 INCHES NOMINAL IN NSN 5340-00-196-4890
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 103-5470
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SURFACE TREATMENT: CADMIUM CASE
• HOLE DIAMETER: 0.204 INCHES NOMINAL IN
• DESIGN TYPE: LOOP ENGAGING
• ENGAGING SURFACE THICKNESS: 0.250 INCHES NOMINAL IN
• ENGAGING SURFACE WIDTH: 0.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT CADMIUM CASE HOLE DIAMETER 0.204 INCHES NOMINAL IN DESIGN TYPE LOOP ENGAGING OVERALL LENGTH 5.000 INCHES NOMINAL IN OVERALL HEIGHT 0.688 INCHES NOMINAL IN ENGAGING SURFACE THICKNESS 0.250 INCHES NOMINAL IN ENGAGING SURFACE WIDTH 0.875 INCHES NOMINAL IN HOLE QUANTITY 3 MATERIAL STEEL CORROSION RESISTING HANDLE STYLE DESIGNATOR LEVEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
5470 Interchangeable interchangeable cross-reference
interchangeable
5329417 Interchangeable interchangeable cross-reference
interchangeable
0E852 Interchangeable interchangeable cross-reference
interchangeable
15Z84 Interchangeable interchangeable cross-reference
interchangeable
4485A Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 103-5470?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103-5470?
103-5470 is a CATCH,CLAMPING.
What parts can replace 103-5470?
There are 13 known substitutes for 103-5470: 5470, 5329417, 0E852 and 10 more. Substitute compatibility should be verified for your specific system.
Is 103-5470 still available?
103-5470 is currently cancelled.
Request a Quote — 103-5470