PartsTable
Technical Data Sheet
Download PDF

102A760H05 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

102A760H05: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), hardness_rating: 24.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-005-4028, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
102A760H05
NSN: 5310-01-005-4028
FSC: 5310 — Nuts and Washers
CAGE: 04808 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DIV CURTISS-WRIGHT EMD (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
hardness_rating24.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
width_across_flats0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
nominal_thread_size0.500 INCHES IN
bearing_surface_typeCHAMFERED
special_test_featuresSPECIAL QUALITY CONTROL TESTING
thread_quantity_per_inch13
NSN5310-01-005-4028
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 102A760H05 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
HARDNESS RATING: 24.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 4 STYLE AND 8 GRADE
•
NUT HEIGHT: 0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
HARDNESS RATING24.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 4 STYLE AND 8 GRADE
NUT HEIGHT0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS2B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
FF-N-836Reference document
Same NSN cross-reference
Reference document — Identification reference
LO-010054028Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 102A760H05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 102A760H05?
102A760H05 is a NUT,PLAIN,HEXAGON.
What parts can replace 102A760H05?
There are 2 known substitutes for 102A760H05: FF-N-836, LO-010054028. Substitute compatibility should be verified for your specific system.
What is the NSN for 102A760H05?
102A760H05 is cataloged in the U.S. Government catalog under NSN 5310-01-005-4028. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 102A760H05

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.