10298600 — SHAFT,STRAIGHT

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

10298600: SHAFT,STRAIGHT.

The SHAFT,STRAIGHT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1045 OR STEEL COMP 1145, end_similarity: NOT IDENTICAL, overall_length: 2.430 INCHES MINIMUM AND 2.450 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES, first_end_style: UNTHREADED CROSS DRILLED, second_end_style: CROSS DRILLED AND CIRCULAR GROOVED. This part is cataloged in the U.S.

Government catalog under NSN 3040-00-507-3231, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

10298600

NSN: 3040-00-507-3231
FSC: 3040 — Miscellaneous Power Transmission Equipment
CAGE: 15434 — CUMMINS INC. (USA)

SPECIFICATIONS

material	STEEL COMP 1045 OR STEEL COMP 1145
end_similarity	NOT IDENTICAL
overall_length	2.430 INCHES MINIMUM AND 2.450 INCHES MAXIMUM IN
surface_finish	63.0 MICROINCHES
first_end_style	UNTHREADED CROSS DRILLED
second_end_style	CROSS DRILLED AND CIRCULAR GROOVED
first_end_diameter	0.8715 INCHES MINIMUM AND 0.8720 INCHES MAXIMUM IN
second_end_diameter	0.8715 INCHES MINIMUM AND 0.8720 INCHES MAXIMUM IN
first_end_hole_depth	0.237 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
second_end_hole_depth	0.061 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
first_end_hole_diameter	0.1420 INCHES MINIMUM AND 0.1440 INCHES MAXIMUM IN
second_end_groove_width	0.0460 INCHES MINIMUM AND 0.0490 INCHES MAXIMUM IN
NSN	3040-00-507-3231

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 63.0 MICROINCHES

•

SECOND END HOLE DIAMETER: 0.1590 INCHES NOMINAL IN

•

FIRST END DIAMETER: 0.8715 INCHES MINIMUM AND 0.8720 INCHES MAXIMUM IN

•

SECOND END DIAMETER: 0.8715 INCHES MINIMUM AND 0.8720 INCHES MAXIMUM IN

•

FIRST END HOLE DEPTH: 0.237 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN

•

FIRST END STYLE: UNTHREADED CROSS DRILLED

•

SECOND END GROOVE DIAMETER: 0.8320 INCHES MINIMUM AND 0.8380 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SURFACE FINISH	63.0 MICROINCHES
SECOND END HOLE DIAMETER	0.1590 INCHES NOMINAL IN
FIRST END DIAMETER	0.8715 INCHES MINIMUM AND 0.8720 INCHES MAXIMUM IN
SECOND END DIAMETER	0.8715 INCHES MINIMUM AND 0.8720 INCHES MAXIMUM IN
FIRST END HOLE DEPTH	0.237 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
FIRST END STYLE	UNTHREADED CROSS DRILLED
OVERALL LENGTH	2.430 INCHES MINIMUM AND 2.450 INCHES MAXIMUM IN
SECOND END GROOVE DIAMETER	0.8320 INCHES MINIMUM AND 0.8380 INCHES MAXIMUM IN
SECOND END DISTANCE FROM HOLE CENTER TO END	0.190 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
SECOND END HOLE DEPTH	0.061 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 1

102986Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 10298600?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 10298600?

10298600 is a SHAFT,STRAIGHT.

What parts can replace 10298600?

There is 1 known substitute for 10298600: 102986. Substitute compatibility should be verified for your specific system.

What is the NSN for 10298600?

10298600 is cataloged in the U.S. Government catalog under NSN 3040-00-507-3231. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

10298600 — SHAFT,STRAIGHT

Request a Quote — 10298600